Roll and Tank
Jacketing Solutions

Premium aluminum and stainless steel jacketing systems with advanced Polysurlyn Moisture Barrier technology for superior insulation protection.

Our Product Range

Aluminum Metal Jacketing Alloy 3003

Aluminium Alloy 3003 with factory applied Polysurlyn Moisture Barrier (PSMB) in half hard temper (H14).

A Polysurlyn Moisture Barrier on jacketing prevents moisture and corrosives in the insulation - which can cause galvanic, chemical and crevice* corrosion - from coming into direct contact with the metal jacketing surface. Polysurlyn Moisture Barrier is factory laminated to the interior surface of the jacketing.

Polysurlyn Moisture Barrier is a co-extruded film of polyethylene and Surlyn® polymers with a total film thickness of 76 microns (3 mils). It exhibits a low water vapour transmission rate, virtually no pinholes. Polysurlyn Moisture Barrier does not decompose until 210°C, auto ignition temperature is above 315°C.

The exterior surface of the jacketing is mill finish, and exhibits an emittance of ε = 0,1

Aluminum Jacketing Alloy 3003 with Polysurlyn Moisture Barrier

Aluminum Jacketing Exterior Clear Coat with Polysurlyn Moisture Barrier

Painted Aluminum Ally 3003 with Polysurlyn Moisture Barrier

Stainless Steel Type 304 with factory-applied Polysurlyn Moisture Barrier (PSMB) for insulation cladding, with a 2B finish for reduced glare. Stainless Steel Type 304 exhibits excellent corrosion resistance and has a melting point of around 1450°C, which offers exceptional fire protection. A Polysurlyn Moisture Barrier on jacketing prevents moisture and corrosives in the insulation - which can cause galvanic, chemical and crevice* corrosion - from coming into direct contact with the metal jacketing surface. Polysurlyn Moisture Barrier is factory laminated to the interior surface of the jacketing. Polysurlyn Moisture Barrier is a co-extruded film of polyethylene and Surlyn® polymers with a total film thickness of 76 microns (3 mils). It exhibits a low water vapour transmission rate, virtually no pinholes. Polysurlyn Moisture Barrier does not decompose until 210°C, auto ignition temperature is above 315°C